Basic Civil and Mechanical Engineering - Question bank

of 4
26 views
PDF
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
This file contains the Question bank on the subject Basic Civil an Mechanical Engineering, of II semester, Anna University syllabus, for B.E., and B.Tech Students
Document Share
Document Tags
Document Transcript
  UNIT III – Power Plant Engineering, Pumps and Turbines. 1. Define power plant.2. What are the different types of power plants?3. State the function of the condenser in the steam power plant.4. What is the function of moderator in nuclear power plant?5. What are the materials used as a moderator in a nuclear power plant?6. What are the fuels used in a nuclear power plant.7. List out the factors to be considered for the selection of site for the hydroelectric power plant.8. State the reason why the steam power plant is preferred than the other plants.9. What is a cooling tower?10. What is the function of a penstock?11. What is meant by nuclear fission?12. What is the function of a intercooler in gas turbine power plant?13. Name the different components used in a gas turbine power plant.14. What is radiation shielding.15. What are the different types of hydro power plants?16. State the demerits of steam power plant.17. List out the applications of gas turbine power plant.18. Name the locations where nuclear power plants were installed in India.19. Define steam turbine.20 List out the main parts of a steam turbine.21 How steam turbines are classified.22. Differentiate between impulse and reaction turbine.23. Relative velocity of a steam increases in a reaction turbine – Justify. UNIT IV 1.What is an engine?2.What are the different types of heat engine?3. What is meant by SI Engine. GE 2152/Basic Civil and Mechanical Engineering/ Question Bank 1 GE 2152 -BASIC CIVIL AND MECHANICAL ENGINEERINGQUESTION BANKPART A  4.What is meant by CI Engine.5.List out the main components of a SI Engine.6.What is a four stroke cycle engine?7.What is the function of a carburetor?8.What is the fundamental difference between two stroke and four strokeengine.9.Why fuel is injected in a CI Engine.10.Mention the different types of ignition systems used in SI engine.11.What is the function of a choke, in a petrol engine?12.What is the function of a spark plug, in a petrol engine?13.What is the function of a fuel pump in a diesel engine?14.Define fuel injector.15.What are the different types of cooling system used in IC engines.16.Define lubrication.17.Mention some engine parts, that require lubrication.18.What are the different types of lubrication systems in IC Engines.19.How boilers are classified.20.List the advantages of high pressure boilers.21.How modern boilers differ from olden day boilers.22.What is the function of an economiser.23.List out the boiler mountings.24.What is the difference between boiler mountings and accessories.25.What is the function of a super heater.26.What is the function of a air pre-heater.27.Give few examples for water tube boiler.28.Give few examples for fire tube boiler. UNIT V 1.Define Refrigeration.2.What is a refrigerator?3.Define Refrigerant.4.Give some examples for refrigerant.5. Define COP6. List out the properties of a good refrigerant.7. State the function of a compressor in refrigeration system.8. Give the applications of a refrigeration.9. Define air conditioning.10. Define Relative humidity.11. Define DBT12. Define WBT13. List out the types of air conditioning. GE 2152/Basic Civil and Mechanical Engineering/ Question Bank 2  14. Define Dew point temperature.15. Define psychrometry.16. Define relative humidity.17. Differentiate between humidification and dehumidification.18. What is the function of a capillary tube.19. Differentiate between window air conditioner and package type airconditioner.20. Draw the layout of a domestic refrigerator. UNIT III 1. Draw the layout of the steam power plant and explain.2. Sketch the diesel power plant and explain its working principle, also stateits merits and demerits.3. Draw the general arrangement of a nuclear power plant and explain itsworking. List out its merits and demerits.4. Explain how energy conversion is taking place in a solar power plant,with a line sketch .5. Draw the layout of a wind mill and state its advantages anddisadvantages .6. Give the schematic layout of a hydro electric power plant and explain thefunction of its each component.7.  What is the principle of a tidal power generation. Also explain the lowtide and high tide systems. 8. Define a centrifugal pump, explain the working of a single stage pumpwith a sketch.9. Explain the construction and working principle of a reciprocating pumpwith neat sketch. Also state its applications.10.  With pressure velocity diagram explain the working of a single stageimpulse turbine.11. With pressure velocity diagram explain the working of a reactionturbine. 12. Differentiate between impulse and reaction turbine.13. With a neat sketch, briefly explain about Lamont Boiler14. Explain the construction and working principle of Cochran Boiler.15. Name the important boiler mountings and briefly explain their functions. GE 2152/Basic Civil and Mechanical Engineering/ Question Bank 3 GE 2152 -BASIC CIVIL AND MECHANICAL ENGINEERINGQUESTION BANKPART B  16. Name some of the boiler accessories, and explain their functions withsketches. UNIT IV 1. With neat sketch, explain the major parts of an IC Engine.2. Explain the working principle of four stroke petrol engine with neatsketches.3. With neat sketches, explain the working principle of two stroke petrolengines.5. Explain the working principle of a four stroke Diesel engine with neatsketch.6. With line diagram, explain the working principle of two stroke dieselengine.7. Discuss the advantages and disadvantages of a CI engines over SI Engines.8. Compare two stroke and four stroke engines.9. Compare air cooling and water cooling system used in IC engines.10. Explain briefly about knocking and detonation.11. With a neat sketch briefly explain about fuel injector. UNIT V 1. With a neat sketch explain the layout of a window air conditioning.2. Draw the layout of a vapour compression refrigeration system, and explainthe working principle of it.3. With a simple circuit diagram, explain the working principle of the vapourabsorption refrigeration system.4. Mention and describe the different types of refrigerants used.5. With a neat diagram, briefly explain about the split type room airconditioner.6. Draw the layout of multi split air conditioner, and explain the workingprinciple of it.7. Write down the definitions of the following:(a) DBT (b) WBT (c) Relative Humidity (d) Dew point temperature (e)humidity (f)Psychrometry (g) COP GE 2152/Basic Civil and Mechanical Engineering/ Question Bank 4
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x