94244 poedergun amrica

Please download to get full document.

View again

of 15
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
POWDER COATING SYSTEM 94244 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright © 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical
Document Share
Documents Related
Document Tags
Document Transcript
  POWDER COAPOWDER COAPOWDER COAPOWDER COAPOWDER COATING SYSTEMTING SYSTEMTING SYSTEMTING SYSTEMTING SYSTEM ASSEMBLY AND OPERATING INSTRUCTIONS 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright © 2006 by Harbor Freight Tools  ®  . All rights reserved. No portion ofthis manual or any artwork contained herein may be reproduced in any shapeor form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 94244 Due to continuing improvements, actual product maydiffer slightly from the product described herein.  Page 2SKU 94244 For technical questions, please call 1-800-444-3353 SPECIFICATIONS Item Description Power Consumption 120 VAC, 60 HzLine Cord 6 feet long, 16 AWG, 3-prong grounded plugAir Supply Pressure 10 to 30 PSICubic Feet PerMinute3.5 CFM at 30 PSIAir Inlet Size ¼ inchRemote ActivationSwitch10 feet longGun Powder Lead 8 feet, high voltage lead.Grounding Cable 8 feet long with ground clampControl Box Fuse 0.5 ampsPaint CuringTemperature400 degrees F. for 15 minutes (recommended)Weight 6.35 lbs. SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions,operating and maintenance procedures, parts list and diagram. Keep your invoice with thismanual. Write the invoice number on the inside of the front cover. Keep the manual andinvoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING!READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructionslisted below may result in electric shock, fire, and/or serious injury.SAVE THESE INSTRUCTION Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas inviteaccidents.2. Do not operate power tools in explosive atmospheres, such as in the presenceof flammable liquids, gases, or dust. Power tools create sparks which may ignitethe dust or fumes.3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area fromdebris such as chips and sparks. Provide barriers or shields as needed.4. Use tool in a well ventilated area . Spray dust can cause injury or explosion hazard.  Page 3SKU 94244 For technical questions, please call 1-800-444-3353 Electrical Safety 5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges,and refrigerators. There is an increased risk of electric shock if your body isgrounded.6. Do not expose power tools to rain or wet conditions. Water entering a power toolwill increase the risk of electric shock.7. Grounded tools must be plugged into an outlet properly installed and groundedin accordance with all codes and ordinances. Never remove the groundingprong or modify the plug in any way. Do not use any adapter plugs. Check witha qualified electrician if you are in doubt as to whether the outlet is properlygrounded. If the tools should electrically malfunction or break down, groundingprovides a low resistance path to carry electricity away from the user.8. Double insulated tools are equipped with a polarized plug (one blade is widerthan the other). This plug will fit in a polarized outlet only one way. If the plugdoes not fit fully in the outlet, reverse the plug. If it still does not fit, contact aqualified electrician to install a polarized outlet. Do not change the plug in anyway. Double insulation eliminates the need for the three wire grounded powercord and grounded power supply system.9. Do not abuse the Power Cord.   Never use the Power Cord to carry the tools orpull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharpedges, or moving parts. Replace damaged Power Cords immediately. DamagedPower Cords increase the risk of electric shock.10. When operating a power tool outside, use an outdoor extension cord marked“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the riskof electric shock. Personal Safety 11. Stay alert. Watch what you are doing, and use common sense when operating apower tool. Do not use a power tool while tired or under the influence of drugs,alcohol, or medication. A moment of inattention while operating power tools mayresult in serious personal injury.12. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keepyour hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, orlong hair can be caught in moving parts.13. Avoid accidental starting.   Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power toolswith the Power Switch on, invites accidents.14. Remove adjusting keys or wrenches before turning the power tool on. A wrenchor a key that is left attached to a rotating part of the power tool may result in personalinjury.  Page 4SKU 94244 For technical questions, please call 1-800-444-3353 15. Do not overreach. Keep proper footing and balance at all times. Proper footingand balance enables better control of the power tool in unexpected situations.16. Use safety equipment. Always wear eye, face, and breathing protection. Dustmask, non-skid safety shoes, hard hat, or hearing protection must be used forappropriate conditions. Tool Use and Care 17. Use clamps (not included) or other practical ways to secure and support theworkpiece to a stable platform. Holding the work by hand or against your body isunstable and may lead to loss of control.18. Do not force the tool. Use the correct tool for your application. The correct toolwill do the job better and safer at the rate for which it is designed.19. Do not use the power tool if the Power Switch does not turn it on or off. Any toolthat cannot be controlled with the Power Switch is dangerous and must be replaced.20. Disconnect the Power Cord Plug from the power source before making anyadjustments, changing accessories, or storing the tool. Such preventive safetymeasures reduce the risk of starting the tool accidentally.21. Store idle tools out of reach of children and other untrained persons. Tools aredangerous in the hands of untrained users.22. Maintain tools with care. Properly maintained tools are less likely to clog and areeasier to control. Do not use a damaged tool. Tag damaged tools “Do not use” untilrepaired.23. Check for misalignment or binding of moving parts, breakage of parts, and anyother condition that may affect the tool’s operation. If damaged, have the toolserviced before using. Many accidents are caused by poorly maintained tools.24. Use only accessories that are recommended by the manufacturer for yourmodel. Accessories that may be suitable for one tool may become hazardous whenused on another tool. Service 25. Tool service must be performed only by qualified repair personnel. Service ormaintenance performed by unqualified personnel could result in a risk of injury.26. When servicing a tool, use only identical replacement parts. Followinstructions in the “Inspection, Maintenance, And Cleaning”  section of thismanual. Use of unauthorized parts or failure to follow maintenance instructions maycreate a risk of electric shock or injury.
Similar documents
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks