DME

Please download to get full document.

View again

of 52
6 views
PDF
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
Detailed Syllabus Of DIPLOMA IN MECHANICAL  ENGINEERING 1 COURSE PERIOD:­3YEARS (SIX SEMESTER)                               TOTAL MARKS­ 3000  FIRST SEMESTER  COURSE TITLE  APPLIED MATHEMATICS­I  APPLIED PHYSICS  APPLIED CHEMISTRY  INTRODUCTION TO IT  SECOND SEMESTER  COURSE TITLE  COMMUNICATION SKILLS­I  APPLIED MATHEMATICS­II  APPLIED PHYSICS  ENGINEERING DRAWING  WORKSHOP PRACTICE  THIRD SEMESTER  COURSE TITLE  COMPUTER APPLICATION­1  APPLIED MACHINES  ELECTRICAL AND  ELECTRONICS ENGINEE
Document Share
Documents Related
Document Tags
Document Transcript
  1   Detailed SyllabusOf DIPLOMA IN MECHANICALENGINEERING  2  COURSE PERIOD:-3YEARS (SIX SEMESTER) TOTAL MARKS- 3000FIRST SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALAPPLIED MATHEMATICS-I DME-110 100 00 100APPLIED PHYSICS DME-120DME-120P50 50 100APPLIED CHEMISTRY DME-130DME-130P50 50 100INTRODUCTION TO IT DME-140 100 00 100SECOND SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALCOMMUNICATION SKILLS-I DME-210DME-210P50 50 100APPLIED MATHEMATICS-II DME-220 100 00 100APPLIED PHYSICS DME-230DME-230P50 50 100ENGINEERING DRAWING DME-240DME-240P50 50 100WORKSHOP PRACTICE DME-250P 00 100 100THIRD SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALCOMPUTER APPLICATION-1 DME-310DME-310P50 50 100APPLIED MACHINES DME-320DME-320P50 50 100ELECTRICAL ANDELECTRONICS ENGINEERINGDME-330DME-330P50 50 100MECHANICAL ENGINEERINGDRAWING –IDME-340 100 00 100MATERIAL SCIENCE DME-350DME-350P50 50 100FOURTH SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALCOMPUTER APPLICATION-II DME-410DME-410P50 50 100THERMODYNAMICS-I DME-420DME-420P50 50 100STRENGTHT OF MATERIALS DME-430DME-430P50 50 100WORKSHOP TECHNOLOGY-I DME-440DME-440P50 50 100MECHANICAL ENGINEERINGDRAWINGDME-450P 00 100 100  3  FIFTH SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALFLUID MACHINES DME-510DME-510P50 50 100THERMODYNAMICS-II DME-520DME-520P50 50 100INDUSTRIAL ECONOMY &PRINCIPALS OF MANAGEMENTDME-530 100 00 100AUTOMOBILE ENGINEERING DME-540DME-540P50 50 100PRODUCTION MANAGEMENT DME-550 100 00 100SIXTH SEMESTER MARKSCOURSE TITLE PAPER CODETHEORY PRACTICAL TOTALINDUSTRIALMANAGEMENTDME-610 100 00 100THEORY OF MACHINES DME-620 100 00 100MACHINE DESIGN DME-630 100 00 100PROJECT WORK DME-640 00 200 200Note:Theory Paper: 30% Continuous Internal Assessment and 70 % University examination.  Practical Paper: 30 % Continuous Internal Assessment and 70 % University examination.  Continuous Internal Assessment:  1) Two or three tests out of which minimum 60% of Continuous Internal  Two will be considered for Assessment Assessment  2) Seminars/Assignments/Quizzes 30% of Continuous Internal Assessment  3) Attendance, class participation 10% of Continuous Internal Assessment  And behavior   4   SEMESTER-IDME-110 APPLIED MATHEMATICS-1 Maximum Time :3 Hrs. University Examination :70 MarksTotal Marks :100 Continuous Internal Assessment : 30 MarksMinimum Pass Marks :40%A) Instructions for paper-setter  1. The question paper will consist five sections namely A, B, C, D and E.2. Each of the sections A, B, C and D will contain two questions and candidates have to attempt atleast one question compulsorily from each section. Each section carry 15% of the total marks3. Section E will com prise of 10-15 short answers type questions, which will cover the entiresyllabus and will carry 40% of the total marks.  B) Instructions for candidates  1. Candidates are required to attempt one question each from sections A, B, C and D of thequestion paper and the entire section E.2. Use of non-programmable scientific calculator is allowed.  SECTION A1. AlGEBRA  Application of Quadratic equations simultaneous equations (one linear and other Quadratic equation)in two variables to engineering problems.Arthmetic Progression, its nth term and sum of n terms with their applications to engineering problems. Geometrical Progression, its nth term and sum of n terms and to infinity with application toengineering problems.Partial fractions (excluding repeated quadratic factors) formally introduction of permutations &combinations, applications of formulae for npr ncr Binomial theorem (expansion without proof) for positive integral index (expansion and general term).Binomial theorem for any index (expansion without proof only). First and second binomialapproximation with application to engineering problems.  SECTION B2. TRIGNOMETRY  Concept of angles, measurement of angles in degrees, grades and radians and their conversions.Trignometrical ratios and their relations.Review of ratios of some standard angles (0,30,45,60,90 degrees), T-Ratios of Allied angles (without proof ), Sum, difference formulae and their applications (without proof).Product formulae (Transformation of product to sum, difference and vice versa).T-Ratios of multipleangles, sub-multiple angles (2A, 3A, A/2).Area of a triangle, Hero’s formulae, solution of triangles with direct applications of cosine formulae,sine formulae, Napier’s analogy only.  SECTION C
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x