Et200sp Ai 4xi 2 4 Wire St Manual en-US en-US

of 30
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00- 0BA1) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ SIMATIC ET 200SP Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1) Manual 03/2012 A5E03551866-01 Preface Documentation guide 1 Product overview 2 Connection 3 Parameter assignment/addressing 4 Interrupt, error a
Document Share
Document Tags
Document Transcript
   Analog Input ModuleAI 4xI 2-/4-wire ST(6ES7134-6GD00-  BA1)  ___________________  ___________________  ___________________  ___________________  ___________________  ___________________  ___________________  ___________________    SIMATICET 200SPAnalog Input ModuleAI 4xI 2-/4-wire ST(6ES7134-6GD00-0BA1) Manual03/2012 A5E03551866-01 PrefaceDocumentation guide 1   Product overview 2   Connection 3   Parameterassignment/addressing 4   Interrupt, error and systemmessages 5   Technical data 6   Parameter data set A    Legal informationLegal informationWarning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to preventdamage to property. The notices referring to your personal safety are highlighted in the manual by a safety alertsymbol, notices referring only to property damage have no safety alert symbol. These notices shown below aregraded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situation can occur if the relevant information is not taken into account.If more than one degree of danger is present, the warning notice representing the highest degree of danger willbe used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating toproperty damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specifictask in accordance with the relevant documentation, in particular its warning notices and safety instructions.Qualified personnel are those who, based on their training and experience, are capable of identifying risks andavoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technicaldocumentation. If products and components from other manufacturers are used, these must be recommendedor approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation andmaintenance are required to ensure that the products operate safely and without any problems. The permissibleambient conditions must be complied with. The information in the relevant documentation must be observed. Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publicationmay be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and softwaredescribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, theinformation in this publication is reviewed regularly and any necessary corrections are included in subsequenteditions. Siemens AGIndustry Sector Postfach 48 4890026 NÜRNBERGGERMANYA5E03551866-01Ⓟ 03/2012 Technical data subject to changeCopyright © Siemens AG 2012.All rights reserved    Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1)Manual, 03/2012, A5E03551866-01 3   Preface Purpose of the documentation This technical manual supplements the system manual ET 200SP Distributed I/O System.General functions of the ET 200SP are described in the system manual ET 200SPDistributed I/O System ( information provided in this device manual and the system manual enables you tocommission the ET 200SP system.  Preface  Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1) 4 Manual, 03/2012, A5E03551866-01
Search Related
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!