Field Communications

of 7
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
Shaping the future ... in FIELD COMMUNICATIONS Integration of Voice and Data Terminals Radio Equipment Other Networks CD-116 Field Digital Switchboard The CD-116 is a state-of-the-art digital switchboard designed for military tactical applications requiring integration of voice and data communications. Speci cally, the CD-116 enables the integration of a variety of equipment into any eld communication system: Analogue telephones (Local Battery and Common Battery) Digital terminals (voice and
Document Share
Document Tags
Document Transcript
  Shaping the future  ...   in FIELD COMMUNICATIONS   Integration of Voice and Data TerminalsRadio EquipmentOther Networks   The CD-116 is a state-of-the-art digital switchboarddesigned for military tactical applications requiringintegration of voice and data communications.Specically, the CD-116 enables the integration of a varietyof equipment into any eld communication system:Analogue telephones (Local Battery and Common Battery)Digital terminals (voice and data) and computersRadio equipment, including Combat Net RadiosOther switchboards, even old magneto type onesPublic Networks, both analogue and digitalA highly compact solution provides complete systemaccessibility through front and rear connectors andbinding posts. The Operator Terminal is integrated in the front panel andincludes an alphanumeric VF display, a keyboard and theoperator handset/headset connector. Interfaces and Capacity Up to 60 analogue interfaces for CB, CBS and LB telephonesUp to 4 Radio Interfaces (voice, PTT and squelch)Up to 4 E&M Interfaces (4 or 6 wires)Up to 12 CO interfaces for legacy PBX or analogue PSTNUp to 3 PRI ISDN interfaces G.703 or Eurocom A/B or CUp to 6 BRI ISDN Interfaces CD-116Field Digital Switchboard Technical Characteristics Functionalities Automatic Call Establishment:- CB or CBS telephones with Pulse or DTMF dialing- Radio and LB telephones with DTMF dialingOperator Assisted Calls:- CB, CBS and LB telephones and radiosHot Line (xed destination)Call ParkingConsultation and Call SwappingCall Waiting (Camp on), Call Hold and Call TransferCall Forwarding Three Party and Extended Conference CallCall Priority and Pre-emptionEURO ISDN ServicesBuilt-in self test (BITE) for easy and fast diagnosticsIntegrated AC and DC input power supply with automaticswitching to battery back up, in case of AC mains failure Main Features  The CD-116 fulls all operational and mechanical requirements of eld environment operation. Its small size and low weight,together with its inherent properties for communication readiness,makes it particularly suitable when mobility, reliability andmaintainability are at stake. Power SupplyConsumption: 90 to 132 VAC (47 – 63 Hz) or180 to 264 VAC (47 - 63 Hz) or21 to 28 VDC39, 47 or 55 W for 16, 32 or 48multifunctional interfaces, typicalITU-T K.11 & K.21 (6 kV)5.000  @ 7 mA (o-hook/on-hook detection and pulse dialing)1.300  @ 20 mA4 V @ 7 mA5V @ 20 mA60 Vrms 20 Hz ±10%, 2 REN35 Vrms, 10 – 40Hz Multifunctional Interfaces Lightning Protection:Loop resistance (line side)CBS modeCB modeClosing voltage (exchange side)CBS modeCB modeRing Current Generator:Ring Current Detector:   340 x 450 x 193 mm13.9 – 14.5 – 15.1 Kg for16 – 32 – 48 multifunctionalinterfaces, typicalOlive green, RAL 6014 Physical Specications Dimensions (W x D x H):Weight:Case Color: Radio Interfaces PTT:Squelch: E&M Interfaces 100 mA, 40 10 – 60 V, 2.2 k0 or -48 V signaling All analogue interfaces Insertion loss:Return loss:Crosstalk:Group delay distortion:Idle noise:Intermodulation distortion: Environmental Specications Operating temperature:Storage temperature:Humidity:Waterproof:Shock:Vibration: ± 1 dB @ 300 – 3400 Hz10 dB @ 600 , 300 – 3400 Hz-65 dB @ 300 – 3400 Hz1.5 ms @ 300 – 3400 Hz-65 dBm0p-40 dB @ 300 – 3400 Hz MIL-STD-810F -25 to +70 ºC-40 to +75 ºC0 to 95 %Method 512.4Method 516.5Method 514.5 Electrical Specication  Technical Characteristics BLC-201Field Telephone  The BLC-201 is a rugged, lightweight and waterproof analogue telephone set designed according to militaryrequirements and suitable for connection to manual(magneto) or automatic 2-wire switchboards, to a similartelephone or directly to the public telephone network (PSTN). The telephone electronics, based on DSP technology, uses ahigh eciency electronic ring generator to ensure low powerconsumption and long battery life. The BLC-201 operates inCommon Battery (CB), Common Battery Signaling (CBS) orLocal Battery (LB) modes, as selected by the user.When operating in LB or CBS modes, the BLC-201 Field Telephone is powered by a pack of four ‘C’ size (IEC-LR14)Ni-MH rechargeable or alkaline battery cells. Batteries are notrequired in CB mode. Electrical Specications Connection:Range:Return Loss:AC impedance at 800 Hz:Minimum DC current (CB mode):Call detection:Call signal generation:DTMF signaling:    Two wire binding posts for connectionto line and one binding post for groundconnection40 km (LB mode);20 km (CBS mode);12 km (CB mode)> 14 dB600 , typical17 mA20 Vrms, 15 to 70 Hz,at least 80 ms45 Vrms, 25 Hz ± 5 Hz, 2 sec,each time Call key is pressedAccording to ITU-T Q.23   Environmental Specications Operating temperature:Storage temperature:Humidity:Waterproof:Shock:Vibration:MIL-STD-810F -25 to +70 ºC-40 to +75 ºC0 to 95 %Method 512.4Method 516.5Method 514.5 Physical Specications Dimensions ( W x D x H):Weight:Case Color: 259 x 148 x 105 mm< 1.2 Kg, without battery;< 1.5 Kg with batteryOlive green, RAL 6014 Accessories BPC-201 Battery Pack Charger Power Supply:Dimensions ( W x D x H):Weight:Case Color: 90 to 264 VAC, 50 to 60 Hz, 35 w125 x 225 x 57 mm670 gOlive green, RAL 6014 A slim and lightweight military standard handset with push-to-talk switch allows easy operation even by personnel wearinghelmet.Silent calls are allowed with extra microphone amplication by selecting ‘Whisper’ mode of operation. Accessories  The BPC-201 is a fast battery charger that will charge a set of rechargeablebatteries for the BLC-201 telephone set usually in less than 2 hours. The charger is microprocessor-controlled and uses –dV detection technologyand a safety timeout for fast charging and a long battery life.  CD-116Accessories BPC-116 Battery Charger for BP-116MDF-116 Main Distribution Box Technical Characteristics  The MDF-116 is an external distribution box that provides 24 pairs of binding posts and mirrors the CD-116 rear panel socket to which it isconnected. The MDF-116 shall be used together with the CD-116 whenever morethan 16 telephone lines are required. The unit then providesconnectivity to an additional set of 16 telephone lines and, if required,E&M, radio and ISDN interfaces. Other CD-116 Acessories include a complete set of cables, covering all interfaces available in the CD-116, and a canvas transportbag is available for transporting the equipment, its cables and manual. BPC-116 Input Voltage:Output Voltage:Output Current:Dimensions (W x D x H):Weight:100 to 240 VAC,45 to 65 Hz28.8 VDC8 A290 x 155 x 81 mm3 kg24 pairs of binding posts1 MDF like connector for 2 Radioor E&M circuitsRugged and waterproof 2mm aluminum box250 x 335 x 93 mm3.8 kgOlive green, RAL 6014MDF Cable, 7.5 mE&M Radio Cable, 3.0 m BP-116 Battery Pack for CD-116  The BP-116 is a Valve-Regulated Lead-Acid (VRLA) Battery Pack thatprovides DC power to the CD-116. The batteries are housed in a rugged aluminum case, speciallydesigned for use in eld environments.  The BPC-116 is an intelligent, fast battery charger for the BP-116battery pack. The charger is microprocessor controlled and oers an extensive set of protection and self-protection functions. MDF-116 Connection to external lines:Housing:Dimensions (W x D x H):Weight:Case Color: Cable assemblies for MDF-116 Connection to CD-116:Connection to radios or E&M lines: BP-116 Nominal Voltage:Rated Capacity:Dimensions (W x D x H):Weight:Case Color:24 V20 Ah (20 hour rate)202 x 212 x 217 mm14.57 kgOlive green, RAL 6014  The VM-116 is a cradle that allows a user to slide in a CD-116 whileretaining all the operational advantages and keeping the controls of the switchboard from the front. It is tted with four (4) shock absorberswhich reduce the eects from mechanical stresses when installedinside a vehicle or a shelter during displacement. VM-116 Vehicle Shock Mount
Search Related
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!